Advanced Management
of Hemostasis Sample​

Enjoy the advantages of automated pre-analytical checks, clot curve review for patient condition insights, and parallelism features for the detection of factor inhibitors. Find out the countless capabilities of our ACL TOP systems and HemoHub today! 

The ACL TOP 50 and 70 Series are equipped with a “Pre-analytical Sample Integrity Testing”. This key feature ensures that every sample is thoroughly checked before analysis, maintaining high standards for accurate diagnostics and better patient care. The HIL Check system is designed to detect three common types of sample interferences: Hemolysis, Icterus, and Lipemia. Different tests are sensitive to different types of interferences. Our systems flag or fail results based on specific thresholds for each of these interferences, consistently with the product insert sheets. Additionally, the Tube Fill Height (TFH) Check is performed on every tube in a sample rack during the first aspiration. This ensures that each tube is filled to the correct level of sample. Last but not least, since clots can interfere with sample analysis, our systems use a pressure sensor to detect clogs, creating a flag and prompting visual inspection to ensure suitability for testing.

Our ACL TOP Family analyzers use precise algorithms to calculate clot time and offer the possibility to analyze all the generated clot curves. This is vital for quality management, regulatory compliance, staff development, and to improve patient care. The “Reaction Curve” is essential for labs, especially in atypical clinical conditions, as it provides insights into each phase of clot formation: activation, fibrin production, and clot completion. It helps evaluate samples with no reported results, confirm prolonged results, and identify the presence of lupus anticoagulants and hemophilia. 

The ACL TOP software can automatically process the ‘Parallelism’ analysis, including parallelism graph display and calculation of parallelism statistics. Factor parallelism is used to detect test interferences, such as heparin, lupus anticoagulants, or specific factor inhibitors. It improves the quality of factor assays and identifies potential interferences affecting single dilution tests. For low levels of factor activity, the dosage is repeated on scale dilutions, as dilutions reduce the possible interference of an inhibitor. If the dilutions align with the calibration curve, it indicates a factor deficiency. If not, it suggests the presence of an inhibitor.

Documents

Videos